Overview
Annoyingly, the Sport and Club trims did not get full climate control. The manual controls are ok but for how cheap it is to retrofit, it was a ripoff for Mazda to not include it on all trims.
How cheap is it to retrofit? Well with a second-hand climate control unit, a sunload sensor, and some wiring/soldering skills, at the time of writing it can be done for under $200 AUD.
Parts
-
A/C Heater Climate Controls: NA9C-61-190F *Must have the Passenger Compartment Temperature Sensor included as it cannot be purchased separately**Must be from the same region otherwise the air mix actuator throws errors and stops working*
-
Sun Load Sensor: GJ6E-61-751B
- Wire
- Choice of Connector (I used 7.5A Deutsch)
- Special PINS to add onto harness
Gallery
